Displays – Page 3 of 4 – Electro-Meters

Showing 21–30 of 37 results

Field selectable for operation in On-Delay, Off-Delay*, Interval, or Repeat Cycle modes
Universal power supply accepts 24 – 240 VAC or 24 VDC
Meets IEC 801 level 4 noise immunity standards
Unique On-Delay/Interval model lets one unit do the work of two in many applications
Industry standard socket connection
Front panel or DIN rail mounting
Flexible start and reset input signals
UL, CUL recognized, CE compliant
IP54 rated front panel – ideal for harsh environments

Five time ranges from 19.999 sec. to 199 hrs.: 59 min.
Two count rates – accept and display counts from 1 to 19999
Two relay outputs – socket mounted for easy replacement
Two form C instantaneous contacts and two form C programmed contacts
N.O. solid state MOSFET, delayed action switch rated at 1 ampere continuous load current, 0-264 VAC 50/60 Hz or DC
Ideal output for switching low level signals and high voltage loads due to MOSFET output’s ON resistance of 0.5 ohm and very low OFF leakage
Programmed outputs operate in one of four load sequences; OOX, OXO, OOX with pulse output, and OOX pulse output with repeat cycle operation
Standard start is defined as ON delay reset timer or counter
For standard start units, timer/counter resets on power failure
Reverse start or OFF delay units will not reset on power failure and will continue cycle when power is restored
Non-volatile memory data retention

16 standard time ranges from 5 seconds to 60 hours
Knob adjustable time ranges – progress pointer for each
Highly visible, calibrated dials (7.85 inch circumference)
Easily read and well-spaced calibrations
Red progress pointer displays remaining time interval
Pilot light indicates when timer motor is energized
Standard timers supplied with “power on” clutch operation
Optional reverse action clutch will not reset on power failure
15 terminal ABS (UL rated 94V-0) molded housing has high impact resistance and will not support combustion

Simultaneous Counter, Totalizer, and Batching
“ON THE FLY” Preset Programming
A-B, A+B and Quadrature operation
Sixteen Preset, Six Decade Main Counter
Single Preset, Six Decade Batch Counter
Six Decade Background Totalizer
4 Wire / 2 Wire RS-485 Provides LOCAL & REMOTE process Control Capability with Modbus RTU protocol
Six Decade Start Count Preset
Counter Reset, Stop / Hold / (*Step Back) Inputs

Bidirectional (go thru zero) counter
Non-Volatile counter operation.
Four user programmable preset setpoints
Programmable reference setpoint
Programmable Operation; A-B, A+B, Quad
Programmable 6 decade correction constant
Selectable Input logic; x1, x2 and x4
STOP/HOLD, REFERENCE ENABLE, OUTPUT DISABLE and REFERENCE Control inputs
4 Wire / 2 Wire RS-485 Provides LOCAL and REMOTE process Control Capability Modbus RTU protocol
FRAM Memory for Setpoint storage
Built In Self- Diagnostics
Eight Alpha Numeric, 14 Segments LED display

Time Interval Measurement Technique
Dual High speed Rate Inputs
Automatic Averaging
Dual Programmable Calibrators on Rate inputs
Programmable Rate and Draw Display modes
Control Inputs (Unlatch and Disable)
Six Solid State Alarm Outputs
4 Wire / 2 Wire RS-485 Provides LOCAL and REMOTE process Control Capability Modbus RTU protocol
Non-Volatile Memory (FRAM) for Programmed parameters
Built In Self- Diagnostics
Eight Alpha Numeric, 14 Segments LED display