Power Meters
Hsiang Cheng HC6010 – Multifunction Power Quality Meters
- Accuracy up to 0.15%
- Over 90 power and energy parameters
- Modbus RTU / DNP3.0 protocol
- Maximum 600V auto range 10~600V
- Low input burden 0.2VA (5A/120V)
- Power supply range 80-260V AC/DC
- True RMS conversion
- Field programmable PT/CT ratio
Hsiang Cheng HC6030 – Multifunction Power Quality Meters
- Flexible control for demand load shedding, power factor, etc.
- Power quality analysis.
- A / W / Var / VA demand
- 8 digital inputs / pulse input totalizing
- 3 controlled relay outputs
- 3 analog process inputs
- 4 isolated analog outputs to a transducer function
- 2 pulse outputs based on KWH, KVarH, KVAH or AH
- 8 channels for time of use to power energy ” “Metering of distribution feeders, transformers, generators, capacitor bands and motors
- Load shedding
Hsiang Cheng UMF – Power Frequency Meters
- True power system design complaints
- ANSI-IEEE, IEC & VDE Standards
- High Accuracy of 0.2% fs
- Display with super rate LED
- Crystal base guarantees long term stability
ITECH IT9100 Series – Power Meters
The IT9100 power meter can provide the maximum input of 1000 V and 50 A and measurement bandwidth of 100 KHz, and can be easily used for measuring voltage, current, power, frequency, harmonics and other parameters. The standard configuration includes USB, RS232 and LAN communication interfaces and also interfaces for USB-based peripheral devices. Users can save the measured parameters into the external storage medium. The basic voltage and current accuracy is 0.1%. Moreover, the power meter has rich integrating functions, such as the active power. It is widely applied in test of motors, household appliances, UPS, etc.
Sifam Tinsley Alpha 20 – Multifunction Power Meter
- Measures important electrical parameters in 3 phase 4 Wire and 3 phase 3 Wire Networks
- True RMS measurement – measures distorted waveform up to 15th harmonic
- Limit Switch control (optional)
- 3 Line 4 Digits ultra bright LED Display (up to 9999)
- On site Programmable CT/PT Ratios
- User selectable CT Secondary 1A/5A
- User selectable PT Secondary from 100 VLL to 500 VLL
- Storage of MIN / MAX values
Sifam Tinsley Alpha 30 – Multifunction Power Meter
- Measures important electrical parameters in 3 phase 4 Wire and 3 phase 3 Wire Networks
- MODBUS (RS-485) Communication (optional)
- Pulse/Limit Switch output (optional)
- 3 Line 4 Digits ultra bright LED Display (up to 9999)
- On-site Programmable CT/PT Ratios
- User selectable CT Secondary 1A/5A
- Measurement & Display of RPM, Run hours, On hours, No. of interruption
Sifam Tinsley Theta 20A & 20V – Electrical Transducers
- Available in Single or Dual output type
- On-site selectable output type (DC current / DC voltage)
- Accuracy class 0.2 (IEC/ EN 60 688)
- Seven Segment LCD Display
- RS-485(Modbus) Communication
Sifam Tinsley Theta 30P – Electrical Transducers
- Available in Single or Dual output type
- On-site selectable output type (DC current / DC voltage)
- Accuracy class 0.2 (IEC/ EN 60 688)
- Seven Segment LCD Display
- RS-485(Modbus) Communication
Yokogawa WT5000 – Precision Power Analyzers
- Sample Rate: 10 MS/s
- Power Bandwidth: 1 MHz
- Resolution: 18 bit
- Elements: 1-7
- Accuracy: 0.03%
- 10.1″ touchscreen
Request a demo
Yokogawa WT1800E – High Performance Power Analyzer
- Sample Rate: 2MS/s
- Power Bandwidth: 0.1Hz-1 MHz
- Resolution: 16 bit
- Elements: 1-6
- Accuracy: 0.05%
- 8.4″ TFT LCD monitor
