Texmate PL-B101D40 Leopard Series - Bargraph Meters

Texmate PL-B101D40 Leopard Series – Bargraph Meters

144×24 mm
101 segments
4 Digit Display
Range: -1999 to 9999
The bargraph can display, full scale, any desired portion of the digital reading.
Bargraph center zero function.
Four programmable setpoints with adjustable Hysteresis.
Setpoint 1 has delay-on-make and delay-on-break plus a special “pump on pump off” mode that creates a Software Features Hysteresis Band between SP1 and SP2.
Relay activation can be selected to occur above (hi) or below (Lo) each setpoint.
Digital display blanking.
Decimal point setting.
Four-level brightness control accessed by the button and adjusted by the button.

SEND US A MESSAGE

CONTACT INFORMATION

900 McKay Road, Unit 2
Pickering, Ontario
Canada, L1W 3X8

Phone: (905) 428-3413
Toll Free: (800) 617-3413

sales@electro-meters.com

Do you have questions about how we can help your company? Send us an email and we’ll get in touch shortly.

Now featuring New Version 2.0 software with one-color Brightness control, this smart Tricolor or Mono-color digital bargraph has four fully programmable set points for monitoring, measurement, and control applications

External transmitters or signal conditioners can be eliminated by direct connection of the sensor output to more than 38 Plug-in Input Signal Conditioners that include:
- AC/DC Current
- AC/DC Voltage
- Load Cell
- Pressure
- Process
- Prototype
- Resistance
- Temperature*
- 4 to 20 mA
Optional isolated 16 bit analog output. User or factory scalable to 4 to 20 mA, 0 to 20 mA or 0 to 10 V across any desired digital span from ± one count to the full scale range of – 1999 to 9999 (12000 counts)
A Programmable Tricolor (Red-Green-Orange) or mono color (red or green), 101 segment high brightness bargraph. Vertical or optional horizontal format
Red 4-digit LED display with a range of -1999 to 9999 (12000 counts). Optional green digital display
Front panel LED annunciators provide indication of setpoint status.
Two 10 Amp Form C, and two 5 Amp Form A relays available
Auto-sensing AC/DC power supply. For voltages between 85-265 V AC / 95-370 V DC (PS1) or 18-48 V AC / 10-72 VDC (PS2).
24 V DC excitation is available to power external 4/20mA transmitters and 5 or 10 V DC excitation is available for resistance bridge type sensors.
Provision to connect an external programming lockout switch.
Provision for external DIM switch to reduce the brightest display setting by 50%
Optional NEMA-4 front cover
Automatic intelligent averaging, smooths noisy signals while providing a fast display response to real level changes.