Shop
Siglent SDS800X HD – Digital Oscilloscope
- Bandwidth up to 200 MHz
- 12-bit high resolution
- Real-time sampling rates of up to 2 GSa/s
- Record length up to 100 Mpts
- Capture waveforms at an impressive rate of up to 500,000 wfm/s
- 7″ touch display
- 2/4 analog channels and 16 digital channels
Siglent SHA850A Handheld Spectrum & Vector Analyzer
- Standard Spectrum Analyzer (SA) and Cable and Antenna Tester (CAT) modes, with optional Vector Network Analyzer (VNA) mode
- Frequency Range: 9 kHz to 7.5 GHz
- Displayed Average Noise Level (Typ.): -165 dBm/Hz
- Single-Sideband (SSB) Phase Noise (Typ.): -104 dBc/Hz @1 GHz, 10 kHz offset
- Typical Dynamic Range in VNA mode: 114 dB
- Measurement Options: Channel power, Adjacent Channel Power Ratio (ACPR), Harmonics, and Third Order Intercept (TOI)
- Features: Standard preamplifier, 8.4” touch screen, up to 4 hours of working time
- Additional Capability: GPS location and logging
Siglent SHN900A Portable Vector Network Analyzer
- 2 port S-parameters, Time Domain, and Pulse Measurements
- Standard VNA and cable test mode with optional SA mode
- Frequency Range: 30 kHz~26.5 GHz
- Range of IFBW: 10 Hz~3 MHz
- Dynamic Range: 110 dB (typ.)
- Handheld instrument with 4 hour battery life and standard bias-Tee
- Standard GPS, Time and Location Information Saving
- Enhanced TDR with eye diagram simulation option
Siglent SHS1000X – Handheld Oscilloscope
- Isolation voltage: CATIII 600 Vrms, CATII 1000 Vrms
- Combines oscilloscope, serial trigger and decoder, spectrum analysis, data logger, and multimeter functions into a convenient and portable design
- Available in 100 MHz or 200 MHz bandwidth models
- Sample rate: 1 GSa/s (single-channel) or 500 MSa/s (two-channels)
- Record length: Up to 12 Mpts
- Includes hardware-based true RMS multimeter
- IP51 dust/water resistance certified
Siglent SHS800X – Handheld Oscilloscope
- Combines oscilloscope, serial trigger and decoder, spectrum analysis, data logger, and multimeter functions in a portable design
- Available in 100 MHz or 200 MHz bandwidth models
- Sampling rate: 1 GSa/s (single-channel) or 500 MSa/s (two-channels)
- Record length: Up to 12 Mpts
- Allows waveform recording for up to 22 hours
- IP51 dust/water resistance certified
Siglent SNA5000A Vector Network Analyzer
- Frequency Range: 9 kHz – 8.5 GHz and 100 kHz – 26.5 GHz
- Frequency Resolution: 1 Hz
- Output Level Setting Range: -55 dBm to +10 dBm
- Dynamic Range: 125 dB
- Supported Ports: 2/4 ports for S-parameters, Balance Measurements, and Time Domain Analysis
- Measurement Capabilities: Q-factor, bandwidth, and Insertion Loss
- Power Source Calibration Compatibility: Compatible with R&S NRPxxA/AN and Keysight U2000A/B series USB power meters
- ECal Kits Compatibility: Compatible with ECal kits from several manufacturers
Request a demo
Siglent SNA6000A Vector Network Analyzer
- Frequency Range: 100 kHz – 13.5 GHz and 100 kHz – 26.5 GHz
- Frequency Resolution: 1 Hz
- Output Level Setting Range: -55 dBm to +10 dBm
- Dynamic Range: 135 dB
- Supported Ports: 2/4 ports for S-parameters, Balance Measurements, and Time Domain Analysis
- Measurement Types: Scattering parameter measurement, differential parameter measurement, receiver measurement, time-domain parameter analysis, limit test, ripple test, impedance conversion, fixture simulation, adapter removal/insertion, spectrum analysis frequency offset, scalar mixer measurement, pulse measurement, Material Measurement
- ECal Kits Compatibility: Compatible with ECal kits from several manufacturers
- 12.1″ touch screen
Siglent SPD1000X Programmable DC Power Supply
- Single channel high-precision programmable voltage output:
- SPD1168X: 16 V / 8 A, total power up to 128 W
- SPD1305X: 30 V / 5 A, total power up to 150 W
- Stable, reliable, Low ripple and noise: ≤ 350 uVrms/3 mVpp; < 2 mArms
- Fast transient response time: < 50 μs
- 5-digit Voltage, 4-digit Current Display, Minimum Resolution: 1 mV / 1 mA
- 2.8-inch true color TFT-LCD 240×320 display
- 2 types of output modes: Two-wire output mode, 4-wire compensation output mode, Max. compensation 1 V
Siglent SPD3303C Programmable DC Power Supply
- 3 independent high precision outputs: Two 32 V / 3.2 A, One 2.5 V / 3.3 V / & 5 V / 3.2 A, totaling 220 W power
- 4-digit voltage and 3-digit current display, with minimum resolution of 10 mV and 10 mA
- Three output modes available: independent, series, and parallel
- Compatible design for 100/120/220/230 V power grids, catering to various power requirements
Siglent SPD3303X / SPD3303X-E Programmable DC Power Supply
- 3 independently controlled and isolated outputs: Two 32 V/3.2 A, one 2.5 V / 3.3 V / 5 V / 3.2 A × 1, totaling 220 W
- Voltage displayed with 5 digits, current with 4 digits, Minimum Resolution: 1 mV/1 mA (SPD3303X)
- Timing function for programmed output steps
- 4.3-inch true color TFT-LCD display with resolution of 480 x 272
- 3 types of output modes: independent, series (max 60 V), and parallel (max 6.4 A)
